MDaemon Server 9.50 英文正式版

MDaemon Server 9.50 英文正式版 Description:
MDaemon Server 9.50 英文正式版
-------------------------------
MDaemon 9.50 - October 24, 2006
-------------------------------

----------------------
SPECIAL CONSIDERATIONS
----------------------

  o [5168] The installer will warn about DEP if the Windows OS version > 5.1
    and DEP is configured to use "OptOut" or "AlwaysOn".

  o The following applies only if you are a licensed user of MDaemon Antivirus
    (MDAV) or SecurityPlus for MDaemon:
  
    These products now require registration key activation.  The goal of the
    activation system is to combat piracy and protect the interests of
    legitimate customers.

    An activation wizard is available which will walk you through the simple
    process of activating your registration key.  You can activate in a fully
    automated fashion or manually if you prefer.  The process takes only a few
    seconds.  
    
    Activation verifies that the key you are using is legitimate.  It also ties
    your registration information to your computer using the MAC address of your
    Network Interface Card making it difficult for others to illegally use your
    registration key.  No personal information about you is required or trans-
    mitted.  Reactivation is required only if you change out your Network card.  
    The 'Help | Activate your Alt-N software' menu selection leads to the
    Activation Wizard should you need to do this in the future.  
    
    Multiple activations are allowed however this is for customer convenience
    only and should not be considered license to violate the EULA.  Registered
    users have 30 days in which to activate.  Activation is required in order
    for Alt-N products to function.

    For a more detailed description of activation see:
    http://www.altn.com/Activation/faq.asp

  o MDaemon no longer supports AntiVirus products from Deerfield.com.

  o If you were using the "Bounce spam back to sender" option in the Spam Filter
    your configuration has been changed to "Flag spam but accept it" due to a
    design change to the Bounce option (see item [5018] below)

  o [5025] When gateways are configured to forward mail and the option to "keep
    a local copy" is enabled there is the potential to redeliver all the same
    mail if someone checks the "Deliver messages at each scheduled remote mail
    interval" option.

    To address this, the following changes were made:

    1) The "Keep a local copy" of forwarded mail option was changed to be dis-
    abled by default.  You should check all your gateways to make sure that this
    setting is as you desire.

    2) Added a warning box when enabling "Deliver messages at each scheduled
    remote mail interval" to warn of the possibility of this occurrence.

  o The "Send mail at this interval" slider value has been reset to a default
    value of five minutes.  You may need to change this to your preference
    (see item [63] below).

  o [4980] Added SMTP parameter RFC compliance checking.  The SMTP server will
    now reject parameters which contain control or 8-bit characters.  This check
    has been combined with the existing basic body compliance check and can be
    toggled on/off via a switch in Misc. Options|Servers which was relabeled to
    reflect this new functionality.  Compliance checks on SMTP parms and body
    content are now ENABLED by default which is a departure from older versions.
    Disable if you must receive mail from non-compliant sources.

  o Check the PTR options on the Reverse Lookup UI.  These settings have been
    returned to defaults due to required internal changes.

  o [4811] For the Japanese version of MDaemon, the installer will correct
    bad folder names used by older versions of MDaemon and Outlook Connector.
    Please make a backup before installing 9.50.  If you're using OC, update
    to version 2.1.2 or newer on the server and all client machines.

------------------
MAJOR NEW FEATURES
------------------

  * [63] CUSTOM SCHEDULING AND MAIL QUEUEING (MDaemon PRO only) *
   
    It is now possible to create any number of schedules you wish.  You can
    name each schedule and attach a schedule to a custom mail queue.  You can
    also create as many custom mail queues as you want.  Use the CF to move
    messages into your custom queues based on any criteria you wish.  For
    example, you can create a schedule called "Big Mail", create a queue to
    store that mail, and then create a Content Filter rule using the new "MOVE
    message to custom QUEUE" action to move messages over a certain size into
    that queue.  If you'd like mailing list messages delivered at certain times
    then create a schedule called (for example) "List Mail", create a queue, and
    then use a Content Filter rule to move messages with an X-MDMailing-List
    header into the new queue.

    Some important points:

    1)  The schedule manager now runs in it's own thread and signals events      
        rather than performing them itself.
    2)  DomainPOP and MultiPOP mail continue to be collected according to the
        Default schedule only (see the scheduler UI).
    3)  Only queues created to handle remote mail (not local mail) are eligible
        for use with a schedule.  Local mail is always delivered immediately.
    4)  Any schedule not bound to a custom queue will be bound to the default
        remote queue.
    5)  The Schedule Editor and Queue Editor UIs have been changed.
    6)  The "Send mail at this interval" slider value has been reset to a
        default value of five minutes.  You may need to change this to your
        preference.
    7)  The RAS option entitled "maximize use of this connection profile" has
        been deprecated and removed.  It is incompatible with the new
        schedule/queue changes.  
    8)  The concept of "temporary" queues has been deprecated and removed.  This
        concept is incompatible with the new schedule/queue changes.
    9)  "Freezing" remote mail queue processing stops ALL remote custom queues.
    10) Removing a queue will remove all schedules tied to the queue and disable
        any content filter rules associated with moving messages into the queue.
    11) You can expand the root node for the Local, Remote, and RAW queue within
        MDaemon's UI.  Doing so will show the path and message count for each
        queue.  However, these counts can slow the UI so close the node when you
        don't need to know the counts.  Double left click any node to load its
        contents into the UI.
    12) When using the "Random" minute option with AV scheduling, accessing the
        schedule editor UI will re-seed all the time values.
    13) The LAN queue which stores mail for remote domains which do not need RAS
        in order to reach will be processed according to the Default mail process-
        ing schedule rather than at local mail processing intervals.  This change
        saved loads of CPU cycles.
    14) [4823] Added "MOVE message to custom QUEUE" content filter action

  * [4601] SPAM TRAPS (MDaemon PRO only) *

    The Security menu has a new option called "Spam Traps".  Spam traps are
    local email addresses purposely designed to collect spam.  These email
    addresses should never be assigned to actual users.  Once your spam traps
    are setup, expose them publicly by using them in a post to a news group or
    public mailing list.  If all goes right, they will be harvested and will
    soon begin receiving spam.  

    A single RCPT to a spam trap address is all it takes to trip the spam trap
    system causing the message to be delivered to the Bayesian spam folder and,
    optionally, banning future connections from the sending IP address.  Some
    security features are bypassed in order to allow this to happen.

    Messages sent to a spam trap are routed only to the Bayesian spam folder.
    They are not delivered to actual users even when other RCPT commands are
    provided in the SMTP session.

  * "NOTES" SUPPORT FOR WORLDCLIENT & OUTLOOK CONNECTOR USERS & SYNCML *
  
    WorldClient now supports a new folder type "Notes".  Notes folders are
    sharable with other users and will synchronize with Outlook Connector.  
    MDaemon's SyncML supports the synchronization of notes folders.  Outlook
    Connector and SyncML require MDaemon PRO.

  * IMPROVED SYNCML SERVER NOW SUPPORTS SYNC4J CLIENTS (MDaemon PRO only) *
  
    MDaemon's SyncML server now supports the open source Sync4j SyncML clients.
    The Sync4j SyncML clients may be downloaded from http://www.funambol.com/
    opensource/downloads.html. Our testing has revealed that the version 3.x
    clients which are currently in beta are more robust and feature complete
    than the version 2.x clients.  The Sync4j encryption option is not supported
    at this time.  

-----------------------------------
CHANGES AND ADDITIONAL NEW FEATURES
-----------------------------------

  o Simplified the so-called "Ghost" session:
    
    1) MDaemon no longer requires a separate "Ghost" program manager icon
    2) The Ghost term was dropped.  Configuration Sessions are now called
       Configuration Sessions.
    3) Launching MDaemon for the first time starts all the mail services
       while any subsequent launch either starts or brings to the fore the
       Configuration Session.

  o PocketPC theme fixes & changes:
    
    1) [4761] Changed navigation to be text links instead of images. This should
       improve load speeds and reduce bandwidth usage
    2) [4836] Changed .PocketPC login to not force the .PocketPC theme if the
       user doesn't pass "&Theme=.PocketPC" in the URL
    3) [4982] If a non-Pocket IE browser uses the .PocketPC theme they will be
       allowed to switch themes (this is useful for desktop browsers that
       accidentally get changed to .PocketPC theme)
    4) [4219] fixed the delete calendar events bug that prevented calendar
       events from being deleted.

  o [5106] Added MDSpamD "debug logging" (which is disabled by default):

    1) Added MDSpamD tab to the main MDaemon UI.
    2) Added switch to logging options to enable MDSpamD logging - a warning
       though, this is a performance drain.
    3) Added same switch to MDSpamD tab in Spam Filter UI.
    4) Added an MDSpamD log file which tracks all this logging - another warn-
       ing, this file could get big fast.

    Known limitation:  When MDaemon runs as a service and user credentials are
    provided MDaemon will not be able to communciate with MDSpamD for logging
    purposes and no logging will take place.

  o [5119] Added "Show Window" option to MDSpamD properties in the Spam Filter.
    When this is enabled the output from MDSpamD is piped to its external process
    window rather than MDaemon's internal UI and logging system.  This will avoid
    the performance drain associated with piping MDSpamD output into MDaemon itself.  
    However, there will be no log file created.  This option can not be used in
    combination with the MDSpamD internal UI and logging option.

  o [4434] Moved the installer backup option from the "directory selection"
    page to the "start installation" page.  This is to solve a problem whereby
    many people were thinking the installation directory was actually the
    backup directory and so they were changing it.  The result was an install-
    ation that did not work properly.

  o [4554] Added option to reverse lookups to exempt authenticated sessions
    from PTR lookups on the connecting IP.  When this switch is enabled the
    PTR lookup on the connecting IP is deferred until after the MAIL command
    in order to determine whether the connection used authentication or not.

  o [4662] You can now enter ZERO into the retry queue configuration for the
    number of days to retry delivering mail.  After the first retry, the message
    will be bounced back.

  o [5067] The option to count sub-folders when applying quota restrictions
    has been disabled by default.  This setting is in Misc. Options|Misc if
    you want to check and make sure it is set to your expectation.

  o [5155] Reorganized the tab layout in the main GUI to group things together
    in a more organized way.  The security related items are now in a Security
    tab and the OC and WC items are in the Mail tab.

  o [5156] Added SyncML log tab to GUI.  This just mirrors the SyncML log file.

  o [5121] Changed work file copy method to prevent .cf files from going missing
    at times.

  o [5120] Added option to Misc Options|GUI to save the state of the stat window
    root node counters across reboots.

  o [5128] The DNS-BL engine was changed to skip the X _most recent_ Received headers
    rather than the X _oldest_ Received headers.  It doesn't seem to make much sense
    to skip the oldest Received headers.  The idea is you want to skip the newest
    Received headers because those stamps would be from the hops closest to you which
    you might trust (especially your ISP in the case of DomainPOP/MultiPOP mail). Also,
    the default number of Received headers to skip for SMTP collected mail was changed
    to 0 rather than 1.  The DNS-BL GUI was updated.

  o [5139] Moved several CF and AV related .dat files out of MDaemon's resource file
    and into disk files that the installer will pick up and place in the APP folder.

  o [5068] Constantly hitting the disk to check user quotas has been identified
    as a significant performance drain.  So, the results of these quota checks
    are now cached in QUOTACOUNTS.DAT.  MDaemon will maintain and police this
    file.  If you want to clear the cached quota value for an account add that
    account's email address to a CLEARQUOTACOUNTS.SEM file and place it in the
    APP folder.

  o [5070] Added a "Statistics" tab to the main UI.  This contain the same
    summary report that is generated by other means (see elsewhere in this
    document).  This report is not updated in real-time but it should refresh with
    current content every minute or so.  It is possible to alter the text in
    this tab because I don't know how to prevent that however it could be useful I
    suppose.

    If you don't like the font I used you can customize it in MDaemon.ini:

    [ReportWindow]
    DefFontFace=Courier New
    DefFontHeigh=15
    DefFontWidth=7

  o The WebAdmin configuration dialog has lost the domain and language select-
    ion controls.  WebAdmin dymanically detects the language that the user
    needs so these controls were irrelevant.

  o [5071] Added quarantine queue to the queue list in stats window.

  o [5073] Added right-click option to session window to put IP of selected
    entries on the dynamic screen.  Nothing will be done if dynamic screening is
    disabled and this feature can not add trusted or local IPs.

  o [5069] Right-clicking on a root node in stats window gives a "reset root
    node counts" option which zeros all the root node counters (this is
    necessary because they all inter-relate for proper calculations).

  o [5075] Removed option to "authenticate list posts using FROM header" from
    Misc Options.  This will always take place.  MDaemon will also verify list
    posters using the SMTP envelope unless you set this switch in the
    MDaemon.ini file:

    [Special]
    EnvelopeListCheck=No (default Yes)

  o [5096] WorldClient's mail check has been optimized to defer loading new
    messages until a folder is actually opened.  Previously, checking for
    mail would load all new messages in all folders.  This should reduce log
    in times.

  o [5125] Updated DKIM to version 0.5 of the specification.

  o [4969] Added DKIM signing option to include z= (copied headers) in
    signatures.

  o [4956] The DKIM verifier no longer queries for or honors DKIM SSP records
    by default.  You can re-enable this via a new switch located on the DK/DKIM
    verification UI.  SSP is being disabled by default in preparation for SSP
    changes which are coming thanks to the work being done in the IETF right
    now.  When enabled, MDaemon's DKIM verifier processes SSP records according
    to http://tools.ietf.org/html/draft-allman-dkim-ssp-00.

  o [4918] WorldClient's contacts now support a name prefix and suffix.  These
    fields are synchronized with the Outlook Connector and SyncML.

  o The FORGED_MUA_OUTLOOK rule has been reenabled in 80_MDaemon_scores.cf.

  o Added scroll-bar to folder selection in Account filter editor.

  o MDaemon will log an error code into the System log anytime a process fails
    to start or fails to start as a specified user.  This will allow us to try
    and discover why these failures happen for some sites.

  o The Content Filter "Administrators" tab has been renamed "Recipients" since
    this is just a list of email addresses that receive Content Filter
    notification messages.

  o Previously, messages over 50K were not put through the spam filter.  Now the
    default is 200K.

  o Slightly changed text on Account Forwarding, Gateway Forwarding, and Setup|
    Primary Domain|Delivery UI to state how to specify host name values.

  o The installer will delete old 80_MDaemon_surbl.cf and 90_MDaemon_surbl.cf
    files.

  o Slight textual changes to Spam Filter Bayesian tab.

  o Made slight GUI change to mailing list notifications tab.

  o [4924] IP and Host screening will never block local or trusted IPs.

  o [4892] Several changes were made to the anti-relay logic and UI.  The UI was
    changed to better reflect how the options actually work and interact.  For
    example, the options to verify whether local accounts exist when given in an
    SMTP MAIL or RCPT command now operate on their own - they no longer depend
    on what the anti-relay setting says.  Second, a new option is available
    which will allow you to control whether messages sent from trusted IPs or
    hosts should be relayed.  In previous versions this was always allowed but
    now it has to be specifically enabled.

  o [4928] Removed update checking code from MDaemon.exe and put it all into
    MDUpdater.exe (previously some of it was in one place and the rest in the
    other place).

  o [4926] Messages submitted to MDaemon from the same computer as MDaemon will
    no longer be spam filtered by default.  This mainly impacts WorldClient
    since mail submitted by WorldClient to MDaemon for delivery always takes
    place on the same computer.  You can disable this behavior by setting the
    following switch in the CFilter.ini file:

    [SpamFilter]
    SkipLocalLoopback=No (default Yes)

  o [2237] Added an option to the Content Filter which allows you to scan the
    content of zipped attachments looking for restricted files.  This option
    appears on a slightly redesigned "Attachments" tab within the Content
    Filter.  In addition, any rule which triggers based on a file name match
    will trigger if the file is found within a zipped attachment.

  o [4859] Added an option to Misc Options|Headers and Setup|Primary Domain to
    always use the FQDN value when creating Received header stamps.  By default,
    MDaemon uses the domain value associated with the connecting IP or
    recipient(s).

  o Added four INI values for that can be placed in WorldClient's Domains.ini
    or User.ini files that will speed up the HTML compose component's load time
    by disabling specific plugins:

    DisableComposeCharacterMap=Yes
    DisableComposeListType=Yes
    DisableComposeStylist=Yes
    DisableComposeTableOperations=Yes

    These values default to 'No' so that the compose view will load as people
    are used to in the 9.0 series.

  o [4921] Added two User.ini values that will set a minimum width for the left
    pane in the WorldClient LookOut theme.  The possible values are:

    MinLeftPaneWidth=[Yes/No]
    MinLeftPaneWidthValue=[1-350]

  o [4965] Improved the stats report and added a "Statistics" node to the Stats
    window.  Also, at midnight each night, the postmaster and all content filter
    administrator users will receive the report via email.  If this isn't desired
    the following MDaemon.ini switch can disable it:

    [Special]
    SendStatsReport=No (default Yes)

    This is the same report that is generated when MDaemon receives the Status
    command via qualified email.

  o [3639] added separate logging option to enable/disable MultiPOP log

  o [4865] added separate logging option to enable/disable DomainPOP log

  o [4864] changed UI references to "forward to this host" to "forward to this
    domain" since MX record processing is being performed.  Also added some UI
    text explaining how one can still achieve a "forward to this host" A-record
    only delivery.

  o [4794] removed greylist file cleanup during MDaemon startup  

  o [4798] updated/added warning text when enabling PTR/HELO refusal options.

  o [4839] added "Delete Message" IMAP filter rule action

  o [4845] added "Strip X-Spam-Flag header" option to Misc. Options|Headers UI.
    If you want to strip existing X-Spam-Flag headers from messages you will
    Need to set this switch.  The old MDaemon.ini hack to do this has been
    deprecated.
    
  o [4795] The DNS options "Immediately return mail when DNS says A record host
    not found" and the similar option for MX records have been replaced by a
    single option that will return (bounce) messages when there are no MX _or_ A
    records for a domain.  The GUI was appropriately updated.  The option is
    enabled by default.

  o [4919] Wednesdy logs are now spelled correctly - Wednesday.

  o [4927] Updated MDSpamD to use SA 3.15.

  o [4933] MD will police APP folder for RAS dll and delete it if there (to
    prevent a possible exploit).

  o [4939] The name of the MDaemon service is now always "MDaemon" and can not
    be changed by users.  The service editor in the UI was updated accordingly.
    Also the Network Resource Access text was altered slightly.

  o [4846] Webadmin SSL port will be displayed in the UI when in use.
  
  o [4929] Removed 'Close' right-click menu options from all menus.

  o [4957] The plug-in system now supports processing of MultiPOP and DomainPOP
    collected mail.  See plugins.txt for more information.

  o [4591] The full name field is now populated for contacts that MDaemon adds
    to the default address book when an account sends mail.
  
  o [5039] Reworked the gateways UI to use more consistent terminology and to
    get rid of some of the unneeded text cluttering it up.

  o [5040] It is no longer required to first remove a queue from the queue
    editor when disabling a gateway's auto-spool option.

  o [5018] Removed option to "bounce" spam message from the spam filter UI.
    If there is a need to bounce a known spam it can still be done by setting
    the following manually in CFilter.ini:

    [SpamFilter]
    BounceSpam=Yes (default no)

    Setting this switch will cause MDaemon to ignore the other spam disposition
    options (delete, spam trap, and flag)

  o [5034] Added option to import original message text into body of MDaemon
    generated DSN messages.  The option is disabled by default because this
    makes the DSN messages twice as big.  To enable, edit the following in
    MDaemon.ini:

    [Special]
    ImportMessageIntoDSN=Yes (default No)

  o [5057] Added "Message Size" test to user-defined IMAP filter rules.  This
    works with the new "is greater than" and "is less than" tests which were
    also added.  It also works with "is equal" and "is not equal" tests.

  o [5021] Bayesian learning will no longer take place when using external spam
    daemons (there's no point really).  Also Bayesian learning process was some-
    times logging failures needlessly (for example, when learning was disabled).

  o [5022] Added option to Misc Options|Misc to enable/disable the counting of
    groupware (non-mail) folders when using disk/file quotas.  Also, renamed
    "Use Strict Quotas" to "Include all inbox sub-folders in quota calculation"
    which is a little more descriptive.

  o [5054] The retry queue is now employed for all delivery options.  The Setup
    Delivery UI was greatly changed due to this.  So, whether you are delivering
    directly, sending all mail to another server, or sending problem mail to an-
    other server, the retry queue should be involved.

  o [5027] Added option to Retry UI to move undeliverable DSN messages into the
    bad message folder.  This applies only to DSN's that MDaemon has generated.

  o [5042] Police up references to "MDaemon AntiVirus" in MDaemon.exe.  Those
    references should be changed to "SecurityPlus" if MDAV version >= 3.00.

  o [5049] Added session window right-click menu option: "Add to IP Screen"
    which adds the IP address of the selected session entries to the "All IPs"
    section of IP Screen.  

  o [4986] When using Active Directory monitoring and specifying an "alias"
    value for accounts in ActiveDS.dat MDaemon will append '@<domain>' to the
    expanded value but only if the value doesn't already have a '@' char in it.  
    For example, Alias=%givenName%_%sn% (the default) wouldn't normally yield a
    '@' character whereas Alias=%mail% probably would.  In the first case,
    '@<domain>' will be appended.  In the second, it won't.

  o [4622] Added paging support to WorldClient's task view. This should improve
    the rendering speed for larger task lists.

  o [4971] Added percentage calculations to all relevant sub-nodes on Stats tab.

  o [5241] SyncML: Tasks now support a date range filter.  For example
    Tasks?/dr(-7, 7) will only synchronize tasks without a due date or
    where the due date is up to seven days in the past or future.

  o [5247] Added composite log switch for logging plugin activity

  o Returned default spam/ham Bayesian required samples to 200 each.

  o [3847] MDStats displays the MDAV and OC registration keys
  o [2887] MDStats supports message sizes larger than 2 GB
  o [4779] MDStats supports directory sizes large than 2 GB
  o [4879] MDStats displays message & directory sizes with thousands separators

FIXES
-----

  o fix to Firefox requiring the entire page to reload when an AJAX request was
    being made in some instances
  o fix to cfengine waiting too long to process a message once mdspamd.exe is
    restarted
  o [4755] fix to Japanese MDaemon signature possibly corrupting message text
  o [4771] fix to options in CFilterGUI not grayed when scanner disabled
  o [2371] fix the list boxes on the public folder screen of cfilter to scroll
    if public folder names were long.
  o [4793] fix to PTR "domain not found" closing connection errantly
  o [4804] fix to mdspamd looking for site config paths
  o [4802] fix to mdspamd to not create the spamd-XXXX-init folders needlessly
  o [4816] fix to SyncML is unable to synchronize tasks with SonyEricsson z520
  o [4821] fix to temp queues cleared on startup (functionality deprecated)
  o [4834] fix to ghost unable to create SEM files to signal MDaemon for things
  o [4835] fix to CFEngine/MDSpamD process shutting down when Ghost starts up
  o [4797] fix to not marked as spam when score exactly equals threshold
  o [4847] fix to LogonToNetwork being called and user impersonating taking
    place even when not running as a service
  o [4854] fix to LogonUser() called once/thread rather than once/process
  o [4856] fix to "Could not start process X as user Y on domain Z" errors (fix
    needs confirmation).
  o [4857] fix to archival and public folder copies of system generated mail
    going through content filter when not configured to do so
  o [4863] fix to crash/corruption when Network Resource Access UI saves data
  o [2236] fix to log files not rotating due to ghost session connected
  o [4867] fix to errant handling of certain catalog requests
  o [4868] fix to service restarting as an application and not a service
  o [4882] fix to wrong CopyFile function getting called at times
  o [4502] fix to the day view not scrolling to the first event or the work day
    when an all day event exists
  o [4925] fix to % calculations being wrong in the GUI
  o [4941] fix to MDSpamD being restarted needlessly by the UI
  o [4932] fix to filelist-xx.dat file referencing deprecated killfile.sup
  o [4938] fix to MDLaunch not stopping/starting MDaemon server/app correctly.
    MDLaunch will now always start MDaemon as a service if the service exists.
  o [4897] fix to SyncML: Marking task complete does not set date completed
  o [4900] fix to SyncML: When synchronizing calendar events, changing the date
    range does add or delete events from the client
  o [4902] fix to SyncML: Date range based on current time rather than midnight
  o [4908] fix to SyncML: When sent to the client, the start date for recurring
    events is set to the first occurrence within the date filter
  o [4910] fix to SyncML: Recurring events ending on the last day of the date
    filter will not be sent to the client
  o [4911] fix to SyncML: Monthly recurring events sent to the client may occur
    on the wrong day
  o [4912] fix to SyncML: Monthly by day recurrence sends weekday information
  o [4913] fix to SyncML: RRULE sent for "last week of month" contains "1-+"
  o [4914] fix to SyncML: An event from the client with monthly by position
    recurrence for multiple weekdays will not be added to the server
  o [4915] fix to SyncML: Only the first line of a street address is sent
  o [4916] fix to SyncML: Commas in contact categories converted to semicolons
  o [4917] fix to SyncML: When only one of a contact's email addresses or
    websites is specified, it may appear in the wrong field on the client
  o [4915] fix to SyncML: Dates before 1980 are not allowed on some clients
  o [4949] fix to Spam Filter UI restarting MDSpamD even when clicking Cancel
  o [4945] fix to bad Content-Type header generated from RAW messages having
    attachments to multiple recipients  
  o [4955] fix to plug-in SMTPMessageFunc calls not working for MDAV trial keys
  o [4967] fix to UI unable to open OC release notes
  o [4968] fix to purchase/upgrade option not always redirecting to correct site
  o [4970] fix to AUTH not working when smart host enclosed in brackets
  o [4948] fix to delivery not moving to next MX when A record lookup times out
  o [4947] fix to SyncML logs are not overwritten
  o [4898] fix to SyncML not supporting task states "In Progress" and "Deferred"
  o [4972] fix to Stats tab counts not initialized properly on startup
  o [4973] added msg/per hour stats to UI and statistics report
  o [4742] fix to configuration session whitelist changes not being honored
    without restarting MDaemon
  o [4740] fix to some .cf files getting blanked out when using foreign MDSpamD
  o [4688] fix to Empty Trash not working in .XHTML theme
  o [4714] fix to long names wrapping onto two or more lines in the LookOut
    Contacts view
  o [4989] fix to DomainKeys verification of Gmail messages fails
  o [2329] fix to session transcript not included in DSN at times
  o [4866] fix to smart host not used on 4xx errors at start of mail session
  o [5008] fix to some plug-in functions working when they shouldn't
  o [5009] fix to About page showing AV trial days left twice
  o [5046] fix to "MAIL FROM" sometimes yields unexpected results bug
  o [5020] fix to contact records overwritten with each use of list editor
  o [5013] fix to SyncML VCARD parser may not read the type of an address of
    phone number
  o [5029] added support for PLAIN authentication mechanism to IMAP server
  o [5033] fix to truncated welcome message subject in Russian version
  o [5045] fix to Bayesian learn button disabled in ghost/configuration sessions
  o [5047] fix to IPScreenEditor::Add allows banning of local and trusted IPs
  o [5050] fix to session window right-click "Print/Copy" doesn't work right
  o [4987] fix to greylist whitelist and advanced edit dialogs disabled
    improperly
  o [4984] fix to hard-coded "Select Directory" string in UI
  o [4425] fix to public folder ACL's not updated when user deleted
  o [4556] fix to 530 SMTP error code not generating DSN immediately
  o [5072] fix to .ctl files not removed when .msg deleted using UI
  o [5074] fix to "Create missing reply-to header" option using envelope value
    rather than FROM header value.  This broke BATV and VERP systems.
  o [4177] fix to spam filter exclude list not working both ways with aliases
  o [5095] fix to remote queue timing out delivery attempts when certain SMTP
    errors occur
  o [4029] fix to authenticated sessions allowed to send to unknown local users
  o [5097] fix to WC not updating filters to subfolders of a renamed folder
  o [5126] fix to plugin manager object not optimally initializing itself
  o [3250] fix to Comagent may crash if an HTTP connection error occurs
  o [5124] fix to MD3Conv errantly displaying an upgrade dialog
  o [5127] fix to 127.0.0.1 being allowed as valid A record result by resolver
  o [5130] fix to configuration sessions killing CFEngine when they shut down
  o [4617] fix to read receipt generated by WC trashing international characters
  o [5154] fix to gateways with wild-carded domain names not working correctly
  o [5144] fix to trusted IP/domains made via ghost not replicated to main MD
  o [5131] fix to many bugs in MDaemon's shutdown sequence
  o [5158] fix to possible CFEngine.exe lockup when trying to create temp and
    work directories
  o [5182] fix to USER_IN_BLACKLIST_TO score being overwritten in local.cf
  o [5047] fix to IP screen UI allowing banning of local and trusted IPs
  o [5202] fix to possible cfengine.exe queue lockup
  o [5208] fix to weekly recurring event added by SyncML does not appear
    in Outlook (Outlook Connector)
  o fix to some memory leaks in MDaemon and WorldClient
  o [5145] fix to IMAP filter rules showing groupware folders
  o [4806] fix to free/busy data is not available for attendees added from the
    contact picker
  o [4691] fix to invalid calendar XML may cause the Outlook Connector to crash
  o [5172] fix to WC compose caching deleted CC field
  o fix to memory leaks in DomainKeys signing and verification
  o [5219] fix to JavaScript error in WorldClient category picker applet
  o [5226] fix to potential JavaScript exploit in WorldClient
  o [5237] fix to SyncML: Marking a task as "not completed" on the client does
    not update the server
  o [5238] fix to SyncML: Calendar events with a new line in the comments
    field will cause SyncBerry to fail
  o [5243] fix to SyncML: Email addresses are not updated when a contact is
    edited on the device
  o [5244] fix to SyncML: A contact with only a company name will appear as
    "none" or "unnamed" in the contact list on the device
  o (beta only) fix to SyncML: Phone numbers are not updated when a contact
    is edited on the device
  o [5242] fix to changing spam threshold rendering auto-learning ineffective
  o [5245] Composite log settings are now in the Logging Options rather than
    the Misc Options GUI.
  o [5246] fix to composite log logging unknown types by default
  o [5249] fix to GUI allowing empty IMAP delimiter character
  o [5210] fix to meeting attendees may not be saved
  o [5211] fix to cannot delete all meeting attendees
  o [5216] fix to EXITNOW.SEM causing thread dead-lock and app not exiting
  o [5217] fix to beta and trial end-of-life causing thread dead-lock and app
    not exiting
  o [5218] fix to activation period expiration causing thread dead-lock and
    app not exiting
  o [5203] fix to mail directory possibly ending with ".\" or containing ".\"
  o [5225] fix to UI allowing MDSpamD connections/thread > 200
  o [5197] fix to right justified "one per line" toolbars when using taskbar