[转贴]qmail + webmail on Linux9 安装全过程

samfan · 发表于 2004-7-19 00:04:53

Install file list: 
* netqmail-1.05.tar.gz 
* ucspi-tcp-0.88.tar.gz 
* daemontools-0.76.tar.gz 
* vpopmail-5.4.0.tar.gz 
* mysql-standard-4.0.20-pc-linux-i686.tar.gz 
* apache_1.3.31.tar.gz 
* php-4.3.7.tar.gz 
* autorespond-2.0.4.tar.gz 
* ezmlm-0.53.tar.gz 
* ezmlm-idx-0.40.tar.gz 
* qmailadmin-1.2.0.tar.gz 
* sqwebmail-3.5.3.tar.gz 
 
Patches: 
* ezmlm-idx-0.53.400.unified_41.patch 
 
Scripts: 
* qmailctl 
* inst_check 
* qmailadmin_zh 
* zh-cn/* 
* images/webmail/* 
 
Preparation: 
Login the system as root. 
mkdir -p /usr/local/src 
mkdir -p /package 
Move the files of installation, patches and scripts except daemontools-0.76.tar.gz to /usr/local/src 
Move daemontools-0.76.tar.gz to /package 
chmod 1755 /package 
 
Start installation: 
cd /usr/local/src 
tar -xvzf netqmail-1.05.tar.gz 
cd netqmail-1.05 
./collate.sh # important sentence!!! 
cd .. 
tar -xvzf ucspi-tcp-0.88.tar.gz 
rm *.tar # optional, unless space is very tight 
 
cd /package 
tar -xvzf daemontools-0.76.tar.gz 
rm *.tar # optional, again 
 
################################ 
# Install qmail 
################################ 
mkdir /var/qmail 
 
mkdir /etc/qmail 
ln -s /etc/qmail /var/qmail/control 
 
# Create users and groups 
userdel alias 
userdel qmaild 
userdel qmaill 
userdel qmailp 
userdel qmailq 
userdel qmailr 
userdel qmails 
groupdel nofiles 
groupdel qmail 
 
groupadd nofiles 
useradd -g nofiles -d /var/qmail/alias alias 
useradd -g nofiles -d /var/qmail qmaild 
useradd -g nofiles -d /var/qmail qmaill 
useradd -g nofiles -d /var/qmail qmailp 
groupadd qmail 
useradd -g qmail -d /var/qmail qmailq 
useradd -g qmail -d /var/qmail qmailr 
useradd -g qmail -d /var/qmail qmails 
 
cd /usr/local/src/netqmail-1.05/netqmail-1.05 
make setup check 
 
# If your DNS is configured properly, this script should be all you need at this point: 
./config 
 
# Or you can configure your domain. 
./config-fast mail.myqmail.com 
 
################################ 
# Install ucspi-tcp 
################################ 
cd /usr/local/src/ucspi-tcp-0.88 
patch < /usr/local/src/netqmail-1.05/other-patches/ucspi-tcp-0.88.errno.patch 
make 
make setup check 
 
################################ 
# Install daemontools 
################################ 
cd /package 
tar -xvzf daemontools-0.76.tar.gz 
cd /package/admin/daemontools-0.76/src 
patch < /usr/local/src/netqmail-1.05/other-patches/daemontools-0.76.errno.patch 
cd .. 
package/install 
 
# Start qmail script 
vi /var/qmail/rc 
######## Write the following section to file:/var/qmail/rc ######## 
#!/bin/sh 
# Using stdout for logging 
# Using control/defaultdelivery from qmail-local to deliver messages by default 
exec env - PATH="/var/qmail/bin:$PATH" \ 
qmail-start "`cat /var/qmail/control/defaultdelivery`" 
######## End ######## 
 
chmod 755 /var/qmail/rc 
mkdir /var/log/qmail 
 
echo ./Maildir/ >/var/qmail/control/defaultdelivery 
 
mv /usr/local/src/qmailctl /var/qmail/bin/ 
 
chmod 755 /var/qmail/bin/qmailctl 
ln -s /var/qmail/bin/qmailctl /usr/bin 
 
# Create the supervise 
mkdir -p /var/qmail/supervise/qmail-send/log 
mkdir -p /var/qmail/supervise/qmail-smtpd/log 
 
vi /var/qmail/supervise/qmail-send/run 
######## Write the following section to file:/var/qmail/supervise/qmail-send/run ######## 
#!/bin/sh 
exec /var/qmail/rc 
######## End ######## 
 
vi /var/qmail/supervise/qmail-send/log/run 
######## Write the following section to file:/var/qmail/supervise/qmail-send/log/run ######## 
#!/bin/sh 
exec /usr/local/bin/setuidgid qmaill /usr/local/bin/multilog t /var/log/qmail 
######## End ######## 
 
vi /var/qmail/supervise/qmail-smtpd/run 
######## Write the following section to file:/var/qmail/supervise/qmail-smtpd/run ######## 
#!/bin/sh 
QMAILDUID=`id -u qmaild` 
NOFILESGID=`id -g qmaild` 
MAXSMTPD=`cat /var/qmail/control/concurrencyincoming` 
LOCAL=`head -1 /var/qmail/control/me` 
if [ -z "$QMAILDUID" -o -z "$NOFILESGID" -o -z "$MAXSMTPD" -o -z "$LOCAL" ]; then echo QMAILDUID, NOFILESGID, MAXSMTPD, or LOCAL is unset in echo /var/qmail/supervise/qmail-smtpd/run exit 1 
fi 
if [ ! -f /var/qmail/control/rcpthosts ]; then echo "No /var/qmail/control/rcpthosts!" echo "Refusing to start SMTP listener because it'll create an open relay" exit 1 
fi 
exec /usr/local/bin/softlimit -m 2000000 \ /usr/local/bin/tcpserver -v -R -l "$LOCAL" -x /etc/tcp.smtp.cdb -c "$MAXSMTPD" \ -u "$QMAILDUID" -g "$NOFILESGID" 0 smtp /var/qmail/bin/qmail-smtpd 2>&1 
######## End ######## 
 
echo 20 > /var/qmail/control/concurrencyincoming 
chmod 644 /var/qmail/control/concurrencyincoming 
 
vi /var/qmail/supervise/qmail-smtpd/log/run 
######## Write the following section to file:/var/qmail/supervise/qmail-smtpd/log/run ######## 
#!/bin/sh 
exec /usr/local/bin/setuidgid qmaill /usr/local/bin/multilog t /var/log/qmail/smtpd 
######## End ######## 
 
chmod +t /var/qmail/supervise/qmail-send 
chmod +t /var/qmail/supervise/qmail-smtpd 
 
chmod 755 /var/qmail/supervise/qmail-send/run 
chmod 755 /var/qmail/supervise/qmail-send/log/run 
chmod 755 /var/qmail/supervise/qmail-smtpd/run 
chmod 755 /var/qmail/supervise/qmail-smtpd/log/run 
 
mkdir -p /var/log/qmail/smtpd 
chown qmaill /var/log/qmail /var/log/qmail/smtpd 
 
ln -s /var/qmail/supervise/* /service/ 
 
# Allow the local host to inject mail via SMTP: 
echo '127.:allow,RELAYCLIENT=""' >>/etc/tcp.smtp 
qmailctl cdb 
 
# Stop and disable the installed MTA: 
/etc/init.d/sendmail stop 
/sbin/init.d/sendmail stop 
/etc/rc.d/init.d/sendmail stop 
 
# Uninstall the sendmail: 
rpm -e --nodeps sendmail 
 
# Verify that nothing is listening to the SMTP port (25): 
netstat -a | grep smtp 
# If something is running, make sure it's not qmail by doing: 
qmailctl stop 
# The repeat the netstat check: 
netstat -a | grep smtp 
 
# Replace any existing /usr/lib/sendmail with the qmail version: 
mv /usr/lib/sendmail /usr/lib/sendmail.old # ignore errors 
mv /usr/sbin/sendmail /usr/sbin/sendmail.old # ignore errors 
chmod 0 /usr/lib/sendmail.old /usr/sbin/sendmail.old # ignore errors 
ln -s /var/qmail/bin/sendmail /usr/lib 
ln -s /var/qmail/bin/sendmail /usr/sbin 
 
# Create these aliases "stone": 
echo stone > /var/qmail/alias/.qmail-root 
echo stone > /var/qmail/alias/.qmail-postmaster 
ln -s .qmail-postmaster /var/qmail/alias/.qmail-mailer-daemon 
chmod 644 /var/qmail/alias/.qmail-root /var/qmail/alias/.qmail-postmaster 
 
# Start qmail service: 
qmailctl start 
 
# Now qmail should now be running. You can run "qmailctl stat" to verify that the services are up and running: 
# qmailctl stat 
# And run "qmailctl cdb" to reload the /etc/tcp.smtp 
# qmailctl cdb 
 
mkdir /var/qmail/supervise/qmail-pop3d 
vi /var/qmail/supervise/qmail-pop3d/run 
######## Write the following section to file:/var/qmail/supervise/qmail-pop3d/run ######## 
#!/bin/sh exec /usr/local/bin/softlimit -m 3000000 \ /usr/local/bin/tcpserver -v -R -H -l 0 0 110 /var/qmail/bin/qmail-popup \ mail.myqmail.com /home/vpopmail/bin/vchkpw /var/qmail/bin/qmail-pop3d Maildir 2>&1 
######## End ######## 
 
mkdir /var/qmail/supervise/qmail-pop3d/log 
vi /var/qmail/supervise/qmail-pop3d/log/run 
######## Write the following section to file:/var/qmail/supervise/qmail-pop3d/log/run ######## 
#!/bin/sh exec /usr/local/bin/setuidgid qmaill /usr/local/bin/multilog t \ /var/log/qmail/pop3d 
######## End ######## 
 
mkdir /var/log/qmail/pop3d 
chown qmaill /var/log/qmail/pop3d 
chmod 755 /var/qmail/supervise/qmail-pop3d/run 
chmod 755 /var/qmail/supervise/qmail-pop3d/log/run 
ln -s /var/qmail/supervise/qmail-pop3d /service 
 
vi /var/qmail/bin/qmailctl 
######## Add the following section to "start" part of the file:/var/qmail/bin/qmailctl ######## 
if svok /service/qmail-pop3d ; then 
svc -u /service/qmail-pop3d /service/qmail-pop3d/log 
else 
echo qmail-pop3d supervise not running 
fi 
######## End ######## 
 
######## Add the following section to "stop" part of the file:/var/qmail/bin/qmailctl ######## 
echo " qmail-pop3d" 
svc -d /service/qmail-pop3d /service/qmail-pop3d/log 
######## End ######## 
 
######## Add the following section to "stat" part of the file:/var/qmail/bin/qmailctl ######## 
svstat /service/qmail-pop3d 
svstat /service/qmail-pop3d/log 
######## End ######## 
 
######## Add the following section to "pause" part of the file:/var/qmail/bin/qmailctl ######## 
echo "Pausing qmail-pop3d" 
svc -p /service/qmail-pop3d 
######## End ######## 
 
######## Add the following section to "cont" part of the file:/var/qmail/bin/qmailctl ######## 
echo "Continuing qmail-pop3d" 
svc -c /service/qmail-pop3d 
######## End ######## 
 
######## Add the following section to "restart" part of the file:/var/qmail/bin/qmailctl ######## 
echo "* Restarting qmail-pop3d." 
svc -t /service/qmail-pop3d /service/qmail-pop3d/log 
######## End ######## 
 
# Test the Installation: 
cd /usr/local/src 
sh inst_check 
# When everything looks right, inst_check will report: 
# Congratulations, your LWQ installation looks good!

samfan · 发表于 2004-7-19 00:05:11

################################ 
# Install mysql 
################################ 
groupadd mysql 
useradd -g mysql mysql 
 
cd /usr/local 
tar -xvzf /usr/local/src/mysql-standard-4.0.20-pc-linux-i686.tar.gz 
ln -s mysql-standard-4.0.20-pc-linux-i686 mysql 
 
cd mysql 
scripts/mysql_install_db 
 
cd .. 
chown -R root.mysql mysql-standard-4.0.20-pc-linux-i686 
chmod -R 640 mysql 
chmod -R u+X,g+X mysql 
chmod -R ug+x mysql/bin 
chmod -R g+w mysql/data 
chmod -R u+x mysql/scripts 
 
cp /usr/local/mysql/support-files/my-medium.cnf /usr/local/mysql/data/my.cnf 
chgrp mysql /usr/local/mysql/data/my.cnf 
 
cd /usr/local/mysql 
bin/safe_mysqld --user=mysql & 
 
# Set the root password 
/usr/local/mysql/bin/mysqladmin -u root password 'secret' 
 
# Configure MySQL so it is running all the time from bootup onwards 
cp /usr/local/mysql/support-files/mysql.server /etc/rc.d/init.d/mysql 
chmod 744 /etc/rc.d/init.d/mysql 
chkconfig --add mysql 
 
################################ 
# Install apache 
################################ 
cd /usr/local/src 
chown -R root.root apache_1.3.31.tar.gz 
tar -xvzf apache_1.3.31.tar.gz 
 
groupadd www 
useradd -g www www 
 
cd /usr/local/src/apache_1.3.31 
./configure \ --prefix=/usr/local/apache \ --enable-module=so \ --enable-module=rewrite \ --enable-shared=rewrite \ --server-uid=www \ --server-gid=www 
 
make 
make install 
 
################################ 
# Install php 
################################ 
cd /usr/local/src 
tar -xvzf php-4.3.7.tar.gz 
chown -R root.root php-4.3.7.tar.gz 
 
cd php-4.3.7 
./configure \ --with-mysql=/usr/local/mysql \ --with-apxs=/usr/local/apache/bin/apxs 
 
make 
make install 
 
cp php.ini-dist /usr/local/lib/php.ini 
 
vi /usr/local/lib/php.ini 
######## Modify the /usr/local/lib/php.ini file and make sure it contains the following commands. ######## 
max_execution_time=60 
memory_limit=10M 
post_max_size=8M 
upload_max_filesize=8M 
file_uploads=On 
log_errors=On 
error_log=/usr/local/apache/logs/php_error_log 
######## End ######## 
 
chown -R root.www /usr/local/lib/php 
chmod -R g-w,o-rwx /usr/local/lib/php 
 
vi /usr/local/apache/conf/httpd.conf 
######## Modify the /usr/local/apache/conf/httpd.conf file and make sure it contains the following commands. ######## 
User www 
Group www 
ServerAdmin postmaster@myqmail.com 
ServerName mail.five-star.cn 
# Following line should be present already as it would be inserted by the PHP make 
# Make sure you move it outside of the IfDefineSSL section if the make (incorrectly) put it there 
LoadModule php4_module libexec/libphp4.so 
# uncomment (or add) the following line 
AddType application/x-httpd-php .php 
# Add the index.php into this line so apache will use this file as a default in addition to index.html 
DirectoryIndex index.php index.html 
######## End ######## 
 
rm -Rf /usr/local/apache/htdocs/* 
rm -f /usr/local/apache/index.html.* 
rm -Rf /usr/local/apache/cgi-bin/* 
 
cd /usr/local 
chown -R root.root apache 
chmod 755 apache 
chmod -R 600 apache/* 
chmod -R u+X apache 
 
cd apache 
chmod -R u+x bin 
chgrp -R www cgi-bin 
chmod -R u+x,g+x cgi-bin 
chgrp -R www icons 
chmod -R g+rX icons 
chgrp -R www logs 
chmod g+wX logs 
chgrp -R www htdocs 
chmod -R g+rX htdocs 
 
# Run apache every time at bootup. 
rm -rf /etc/rc.d/init.d/httpd 
 
vi /etc/rc.d/init.d/httpd 
######## Create the /etc/rc.d/init.d/httpd file with the following commands. ######## 
#!/bin/sh 
# 
# Startup script for the Apache Web Server 
# 
# chkconfig: 345 85 15 
# description: Apache is a World Wide Web server. It is used to serve \ 
# HTML files and CGI. 
# processname: httpd 
# pidfile: /var/run/httpd.pid 
 
 
# Source function library. 
./etc/rc.d/init.d/functions 
 
# See how we were called. 
case "$1" in start) 
echo -n "Starting httpd: " 
daemon /usr/local/apache/bin/httpd 
echo 
touch /var/lock/subsys/httpd ;; stop) 
echo -n "Shutting down http: " 
killproc httpd 
echo 
rm -f /var/lock/subsys/httpd 
rm -f /var/run/httpd.pid ;; status) 
status httpd ;; restart) 
$0 stop 
$0 start ;; reload) 
echo -n "Reloading httpd: " 
killproc httpd -HUP 
echo ;; *) 
echo "Usage: $0 {start|stop|restart|reload|status}" 
exit 1 
esac 
 
exit 0 
######## End ######## 
 
chown root.root /etc/rc.d/init.d/httpd 
chmod 744 /etc/rc.d/init.d/httpd 
chkconfig --add httpd 
 
################################ 
# Install vpopmial 
################################ 
groupadd vchkpw 
useradd -g vchkpw vpopmail 
 
cd /usr/local/src 
tar -xvzf vpopmail-5.4.0.tar.gz 
chown -R root.root vpopmail-5.4.0 
cd vpopmail-5.4.0 
 
mkdir ~vpopmail/etc 
chown vpopmail.vchkpw ~vpopmail/etc 
echo "localhost|0|vpopmailuser|vpoppasswd|vpopmail" > ~vpopmail/etc/vpopmail.mysql 
chown vpopmail.vchkpw ~vpopmail/etc/vpopmail.mysql 
chmod 640 ~vpopmail/etc/vpopmail.mysql 
 
/usr/local/mysql/bin/mysql --password="secret" 
CREATE DATABASE vpopmail; 
GRANT select,insert,update,delete,create,drop ON vpopmail.* TO vpopmailuser@localhost IDENTIFIED BY 'vpoppasswd'; 
quit 
 
./configure \ --disable-roaming-users \ --enable-logging=p \ --disable-passwd \ --enable-clear-passwd \ --disable-domain-quotas \ --enable-auth-module=mysql \ --disable-many-domains \ --enable-auth-logging \ --enable-mysql-logging \ --enable-valias \ --disable-mysql-limits 
 
make 
make install-strip 
 
vi ~vpopmail/etc/vlimits.default 
default_quota 20971520 # Set the mail box default size 20M. 
 
echo "myqmail.com" > /home/vpopmail/etc/defaultdomain 
 
# Setup the quota warning message that is sent to users when they are at 90% quota. 
vi quotawarn.msg 
######## Create the quotawarn.msg file with the following commands. ######## 
From: SomeCompany Postmaster <postmaster@myqmail.com> 
Reply-To: postmaster@myqmail.com 
To: SomeCompany User:; 
Subject: Mail quota warning 
Mime-Version: 1.0 
Content-Type: text/plain; charset=iso-8859-1 
Content-Transfer-Encoding: 7bit 
 
Your mailbox on the server is now more than 90% full. 
 
So that you can continue to receive mail, 
you need to remove some messages from your mailbox. 
 
If you require assistance with this, 
please contact our support department : 
 email : support@myqmail.com Tel : xx xxxx xxxx 
######## End ######## 
 
cp quotawarn.msg /home/vpopmail/domains/.quotawarn.msg 
 
echo "Message rejected. Not enough storage space in user's mailbox to accept message." > /home/vpopmail/domains/.over-quota.msg 
 
# add a domain 
/home/vpopmail/bin/vadddomain myqmail.com myqmail 
 
# add a test account 
/home/vpopmail/bin/vadduser stone@myqmail.com stone 
 
# delete a user 
# /home/vpopmail/bin/vdeluser stone@myqmail.com 
 
# delete a domain 
# /home/vpopmail/bin/vdeldomain myqmail.com 
 
################################ 
# Install autoresponder 
################################ 
cd /usr/local/src 
tar -xvzf autorespond-2.0.4.tar.gz 
chown -R root.root autorespond-2.0.4 
 
cd autorespond-2.0.4 
make 
make install 
 
################################ 
# Install ezmlm / ezmlm-idx 
################################ 
cd /usr/local/src 
tar -xvzf ezmlm-0.53.tar.gz 
chown -R root.root ezmlm-0.53 
 
cd /usr/local/src 
tar -xvzf ezmlm-idx-0.40.tar.gz 
chown -R root.root ezmlm-idx-0.40 
 
cp -R ezmlm-idx-0.40/* ezmlm-0.53/ 
# (you need to press y quite a few times to allow the patch files to overwrite the original files) 
cd ezmlm-0.53 
patch < idx.patch 
patch -p1 < ../ezmlm-idx-0.53.400.unified_41.patch 
 
make 
make man 
make setup 
 
################################ 
# Install qmailadmin 
################################ 
cd /usr/local/src 
tar -xvzf qmailadmin-1.2.0.tar.gz 
chown -R root.root qmailadmin-1.2.0 
 
cd qmailadmin-1.2.0 
./configure \ --enable-htmldir=/usr/local/apache/htdocs \ --enable-cgibindir=/usr/local/apache/cgi-bin \ --enable-maxusersperpage=12 \ --enable-maxaliasesperpage=12 \ --enable-modify-quota \ --disable-ezmlm-mysql \ --disable-help 
 
make 
make install-strip 
 
# Chinese qmailadmin 
# Backup the orginal files. 
mv /usr/local/share/qmailadmin/lang/en /usr/local/share/qmailadmin/lang/en_bak 
mv /usr/local/src/qmailadmin_zh /usr/local/share/qmailadmin/lang/en 
 
# Test the qmailadmin 
<a target=_blank href=http://mail.myqmail.com/cgi-bin/qmailadmin>http://mail.myqmail.com/cgi-bin/qmailadmin</a> 
 
################################ 
# Install sqwebmail 
################################ 
cd /usr/local/src 
tar -xvzf sqwebmail-3.5.3.tar.gz 
chown -R root.root sqwebmail-3.5.3.tar.gz 
 
cd sqwebmail-3.5.3 
./configure \ --without-authpwd --without-authshadow --without-authpam \ --without-authuserdb --without-authldap --without-authdaemon \ --with-authvchkpw --with-fcgi --enable-unicode=gb2312 \ --enable-webpass=vpopmail \ --enable-cgibindir=/usr/local/apache/cgi-bin \ --enable-imagedir=/usr/local/apache/htdocs/leadbbsfile/webmail \ --enable-mimetypes=/usr/local/apache/htdocs \ --enable-mimecharset=gb2312 \ --with-defaultlang=zh 
 
make 
make install 
make install-configure 
 
cp -a /usr/local/apache/htdocs/leadbbsfile/webmail /usr/local/apache/htdocs/ 
mv -f /usr/local/src/zh-cn/* /usr/local/share/sqwebmail/html/zh-cn 
mv /usr/local/src/leadbbsfile/webmail/* /usr/local/apache/htdocs/leadbbsfile/webmail/ 
 
# Test the webmail 
<a target=_blank href=http://mail.myqmail.com/cgi-bin/sqwebmail>http://mail.myqmail.com/cgi-bin/sqwebmail</a> 
 
Download the source 
* qmail, <a target=_blank href=http://www.qmail.org/netqmail-1.05.tar.gz>http://www.qmail.org/netqmail-1.05.tar.gz</a> 
* ucspi-tcp, <a target=_blank href=ftp://cr.yp.to/ucspi-tcp/ucspi-tcp-0.88.tar.gz>ftp://cr.yp.to/ucspi-tcp/ucspi-tcp-0.88.tar.gz</a> 
* daemontools, <a target=_blank href=ftp://cr.yp.to/daemontools/daemontools-0.76.tar.gz>ftp://cr.yp.to/daemontools/daemontools-0.76.tar.gz</a> 
 
References: 
<a target=_blank href=http://www.lifewithqmail.org/lwq.html>http://www.lifewithqmail.org/lwq.html</a> 
<a target=_blank href=http://www.pipeline.com.au/staff/mbowe/isp/webmail-server.htm>http://www.pipeline.com.au/staff/mbowe/isp/webmail-server.htm</a> 
<a target=_blank href=http://cr.yp.to>http://cr.yp.to</a>

pinjie · 发表于 2004-9-10 09:16:37

按照楼主发的贴子配好后,还给同事分配了几个邮箱测试已经半个月了没什么问题。今天下午开始只能发邮件，服务器收不到任何邮件了。用163.com的邮箱发往qmail服务器后，收不到新邮件，也没有退回163.com。找不到什么原因。redhat8.0+igenus 
 
以前我的信箱收到过这样的服务器消息，几乎是每天都有的 
 
/etc/cron.daily/00webalizer: 
 
Warning: Truncating oversized request field 
Warning: Truncating oversized request field 
Warning: Truncating oversized request field 
Warning: Truncating oversized request field 
Warning: Truncating oversized request field 
Warning: Truncating oversized request field 
Warning: Truncating oversized request field 
Warning: Truncating oversized request field 
Warning: Truncating oversized request field 
Warning: Truncating oversized request field 
Warning: Truncating oversized request field

		自动登录	找回密码
密码			会员注册

[转贴]qmail + webmail on Linux9 安装全过程

Re:qmail + webmail on Linux9 安装全过程

re:按照楼主发的贴子配好后,还给同事分配了几...